This is brushless a metal gear high torque servo motor. Metal gears allow increase servo reliability at high loads, making servo suitable for more critical applications. Unlike dc motors, with servo motors you can position the motor shaft at a specific position (angle) using control signal. The motor shaft will hold at this position as long as the control signal not changed. This is digital servo very useful for controlling robot arms , RC CAR , unmanned airplanes control surface or any object that you want it to move at certain angle and stay at its new position.

Operating Voltage	6V - 8.4V
No Load Speed	0.149sec/60°(67RPM)
Running Current ( no load)：	400mA
Stall Torque (at locked)：	60kg.cm
Stall Current (at locked)：	5.8A
Rated Torque：	20kg.cm
Rated Current：	1900mA
Kt constant：	9.8kg.cm/A
Size	43.7X22X40 mm
Case material：	Aluminum
Gear material ：	Steel
Bearing type ：	Ball bearings
Angle Sensor Type	12Bits Magnetic Coding
Angle ：	180
Connector and Cable：	Material Teflon Length：35CM
Pin Definition：	1 ：Signal 2 ：Vcc 3 ：GND
The Weight ：	95 g
Horn Type：	25T/5.9mm
Gear Ratio：	1/579
Back Lash：	≦0.5°
The rocker phantom：	0°
The rocker screw：	M3X6
Motor：	Brushless Motor
Control System Type ：	Digital comparator
Operating Travel：	180°± 5°(at 500→2500μsec)
Pulse Width Range：	500→2500 μsec
Rotating Direction：	Clockwise(在1500→2000 μsec)
中立位置	1500 μsec
死区宽度	≤4 μsec

Package list:
1 x Servo + Metal horn

中立位置

Robot Arm

2 DOF Robot Arm with Gripper (13 cm)

Servo Pan Tilt Bracket Kit Aluminum

Small brushless Digital Servo Motor 6-8.4V Metal 60KG

ESP32S ESP-WROOM-32 38-Pin CP2102

ESP32 Expansion Connection Shield

Metal Caster Wheel for Robot-30mm